1. 中交第二航务工程局有限公司第五工程分公司
2. 中国地质大学(武汉)工程学院
网络首发:2025-03-21,
纸质出版:2025
移动端阅览
杨茂强, 张江辉, 王永伟, 等. 基于光滑有限元法的岩土体弹塑性分析[J]. 地质科技通报, 2025,44(2):330-339.
杨茂强, 张江辉, 王永伟, et al. 基于光滑有限元法的岩土体弹塑性分析[J]. Bulletin of Geological Science and Technology, 2025, 44(2): 330-339.
杨茂强, 张江辉, 王永伟, 等. 基于光滑有限元法的岩土体弹塑性分析[J]. 地质科技通报, 2025,44(2):330-339. DOI: 10.19509/j.cnki.dzkq.tb20240523.
杨茂强, 张江辉, 王永伟, et al. 基于光滑有限元法的岩土体弹塑性分析[J]. Bulletin of Geological Science and Technology, 2025, 44(2): 330-339. DOI: 10.19509/j.cnki.dzkq.tb20240523.
随着大型工程项目的日益增多,工程中的岩土极限问题也频繁出现,致使采用数值方法处理时,经常面对极端的模型变形问题。传统有限元法在处理极端的模型变形,特别是采用低阶单元分析时,往往会产生收敛问题、体积锁定问题以及网格严重畸变而导致的应力失准问题。寻找一种新的方法进行数值分析具有重要意义。光滑有限元法是一种有效改进传统有限元法固有缺陷,提高求解精度和收敛速度的算法。基于光滑有限元法,结合一种修正的Mohr-Coulomb屈服准则和线性搜索优化算法,建立了岩土体弹塑性计算模型。最后,针对经典的条形基础承载力模型和边坡模型进行验算,数值计算结果与参考解均吻合较好。结果表明光滑有限元法的计算精度明显优于传统有限元法,验证了本研究算法的可行性和实用性。本研究采用光滑有限元法建立的计算模型进一步提高了岩土体弹塑性问题的计算精度,降低了采用传统有限元法分析时存在的计算误差及网格畸变引起的应力失准问题。
ObjectiveWith the increasing number of large engineering projects
geotechnical limit problems are becoming more common
often leading to extreme model deformation when numerical methods are employed. The traditional finite element method frequently encounters convergence issues
volume locking
and stress misalignment due to severe mesh distortion during the analysis of extreme model deformation
especially when low-order elements are used. Therefore
developing a new method for numerical analysis is of great importance. MethodsThe smooth finite element method is an effective approach to address the inherent defects of the traditional finite element method
enhancing both solution accuracy and convergence speed. Thus
based on the smooth finite element method combined with a modified Mohr-Coulomb yield criterion and a linear search optimization algorithm
an elastoplastic calculation model for rock and soil masses is developed in this study. ResultsThe classical bearing capacity model for the strip foundation and slope model was tested
and the numerical results align well with the reference solutions. The findings indicate that the calculation accuracy of the smooth finite element method is clearly superior to that of the traditional finite element method
confirming the feasibility and practicality of the proposed algorithm. ConclusionIn this work
the calculation model developed using the smooth finite element method significantly improves the calculation accuracy for rock and soil elastoplastic problems
while reducing the calculation error and stress misalignment caused by mesh distortion in traditional finite element methods.
霍泽楠.基于Julia语言的弹塑性光滑有限元程序研制[D].中国地质大学(北京),2021(04).
程嘉辉.基于PWE/S-FEM的半无限声学超材料带隙仿真研究[D].河北工业大学,2021(02).
柴应彬.基于光滑有限元法的二维和三维维声学问题数值模拟研究[D].华中科技大学,2014(01).
Su Zhenning,Shao Longtan.A three-dimensional slope stability analysis method based on finite element method stress analysis[J].Engineering Geology,2020.
Xiaodong Fu,Qian Sheng,Yonghui Zhang,Jian Chen,Shankai Zhang,Zhenping Zhang.Computation of the safety factor for slope stability using discontinuous deformation analysis and the vector sum method[J].Computers and Geotechnics,2017.
Jun Liu,Zhi-Qian Zhang,Guiyong Zhang.A Smoothed Finite Element Method (S-FEM) for Large-Deformation Elastoplastic Analysis[J].International Journal of Computational Methods,2015.
Stefan Van Baars.The inclination and shape factors for the bearing capacity of footings[J].Soils and Foundations,2014.
B. Y. XUE,S. C. WU,W. H. ZHANG,G. R. LIU.A SMOOTHED FEM (S-FEM) FOR HEAT TRANSFER PROBLEMS[J].International Journal of Computational Methods,2013.
G. R. Liu,L. Chen,T. Nguyen‐Thoi,K. Y. Zeng,G. Y. Zhang.A novel singular node‐based smoothed finite element method (NS‐FEM) for upper bound solutions of fracture problems[J].International Journal for Numerical Methods in Engineering,2010.
Z.C. He,G.R. Liu,Z.H. Zhong,S.C. Wu,G.Y. Zhang,A.G. Cheng.An edge-based smoothed finite element method (ES-FEM) for analyzing three-dimensional acoustic problems[J].Computer Methods in Applied Mechanics and Engineering,2009.
H Nguyen-Xuan,G R Liu,T Nguyen-Thoi,C Nguyen-Tran.An edge-based smoothed finite element method for analysis of two-dimensionalpiezoelectric structures[J].Smart Materials and Structures,2009.
T. Nguyen‐Thoi,G. R. Liu,K. Y. Lam,G. Y. Zhang.A face‐based smoothed finite element method (FS‐FEM) for 3D linear and geometrically non‐linear solid mechanics problems using 4‐node tetrahedral elements[J].International Journal for Numerical Methods in Engineering,2009.
X. Y. Cui,G. R. Liu,G. Y. Li,G. Y. Zhang,G.Y. Sun.Analysis of elastic-plastic problems using edge-based smoothed finite element method[J].International Journal of Pressure Vessels and Piping,2009.
G.R. Liu,T. Nguyen-Thoi,K.Y. Lam.An edge-based smoothed finite element method (ES-FEM) for static, free and forced vibration analyses of solids[J].Journal of Sound and Vibration,2008.
G.R. Liu,T. Nguyen-Thoi,H. Nguyen-Xuan,K.Y. Lam.A node-based smoothed finite element method (NS-FEM) for upper bound solutions to solid mechanics problems[J].Computers and Structures,2008.
X.Y. Cui, G. R. Liu, G. Y. Li, X. Zhao, T.T. Nguyen, and G.Y. Sun.A Smoothed Finite Element Method (SFEM) for Linear and Geometrically Nonlinear Analysis of Plates and Shells[J].CMES: Computer Modeling in Engineering & Sciences,2008.
G. R. Liu,T. T. Nguyen,K. Y. Dai,K. Y. Lam.Theoretical aspects of the smoothed finite element method (SFEM)[J].International Journal for Numerical Methods in Engineering,2007.
Jyant Kumar,K. M. Kouzer.Effect of Footing Roughness on Bearing Capacity Factor N γ[J].Journal of Geotechnical and Geoenvironmental Engi,2007(5).
G. R. Liu,K. Y. Dai,T. T. Nguyen.A Smoothed Finite Element Method for Mechanics Problems[J].Computational Mechanics,2007.
Jyant Kumar.Nγ for rough strip footing using the method of characteristics[J].Canadian Geotechnical Journal,2003(3).
D Y Zhu,C F Lee,K T Law.Determination of bearing capacity of shallow foundations without using superposition approximation[J].Canadian Geotechnical Journal,2003.
Jiun‐Shyan Chen,Cheng‐Tang Wu,Sangpil Yoon,Yang You.A stabilized conforming nodal integration for Galerkin mesh‐free methods[J].International Journal for Numerical Methods in Engineering,2001.
Radoslaw L. Michalowski,Liangzhi You.Non-Symmetrical Limit Loads on Strip Footings[J].Soils and Foundations,1998(4).
A.J. Abbo,S.W. Sloan.A smooth hyperbolic approximation to the Mohr-Coulomb yield criterion[J].Computers and Structures,1995(3).
M.D. Bolton,C.K. Lau.Vertical bearing capacity factors for circular and strip footings on Mohr–Coulomb soil[J].Canadian Geotechnical Journal,1993(6).
L. Prandtl.Hauptaufs?tze: über die Eindringungsfestigkeit (H?rte) plastischer Baustoffe und die Festigkeit von Schneiden[J].ZAMM ‐ Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik,1921(1).
周少伟,边小卫,李卫波,马园园,李菲.考虑降雨条件陕北Q_2黄土斜坡稳定性的非线性劣化研究[J].地质科技通报,2024(03).
李钰,陈明亮,黄会宝,蒋楠,吕鹏飞,周家文.新华滑坡变形演化规律与预警判据[J].地质科技通报,2024(03).
范亚杰,李燕,李中潘,陈荟键,冯志强.接触与大变形问题的光滑有限元分析[J].应用数学和力学,2024(02).
易富,孟兴涛,赵文华,杜常博.基于因素空间的露天采坑边坡稳定性评价[J].地质科技通报,2023(05).
郑建校,段志善,周立明.基于渐进均匀化的力-电-热耦合光滑有限元法研究[J].中南大学学报(自然科学版),2023(04).
黄湛勇,王刚,安玉民.基于光滑有限元法的屏蔽微带线静电场研究[J].电子器件,2023(02).
马玉娥,陈鹏程,郭雯,彭帆.基于光滑有限元法的热-弹相场断裂研究[J].固体力学学报,2023(03).
朱婷婷,刘宝会,王刚,刘易.基于边光滑有限元法的骨重建力电效应[J].医用生物力学,2022(04).
李春光,赵晨,赵嵘.端承桩法向接触互补问题的非光滑牛顿算法[J].华中科技大学学报(自然科学版),2023(07).
陈飞宇,董利飞,王苗,王凡顺.基于灰色马尔科夫模型的地基承载力预测[J].地质科技通报,2022(03).
王建明,李钊全,李博志.基于光滑-扩展有限元法的裂纹扩展研究[J].郑州大学学报(工学版),2022(02).
姚凌云,于德介,臧献国.二维声学数值计算的光滑有限元法[J].机械工程学报,2010(18).
贾善坡,陈卫忠,杨建平,陈培帅.基于修正Mohr-Coulomb准则的弹塑性本构模型及其数值实施[J].岩土力学,2010(07).
郑宏,田斌,刘德富,冯强.关于有限元边坡稳定性分析中安全系数的定义问题[J].岩石力学与工程学报,2005(13).
0
浏览量
0
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621