华中农业大学工学院/农业农村部长江中下游农业装备重点实验室,武汉 430070
朱家庭,E-mail:3252605113@qq.com
徐勤超,E-mail:hlxqc@mail.hzau.edu.cn
收稿:2025-10-16,
纸质出版:2026-03-15
移动端阅览
朱家庭,刘传鑫,卢璐,等.柑橘育苗软钵振动装填生产线的设计与试制[J].华中农业大学学报,2026,45(2):250‐258.
ZHU Jiating,LIU Chuanxin,LU Lu,et al.Design and prototyping of a vibration-filling production line for soft-pot seedling of citrus[J].Journal of Huazhong Agricultural University,2026,45(02):250-258.
朱家庭,刘传鑫,卢璐,等.柑橘育苗软钵振动装填生产线的设计与试制[J].华中农业大学学报,2026,45(2):250‐258. DOI: 10.13300/j.cnki.hnlkxb.2026.02.026.
ZHU Jiating,LIU Chuanxin,LU Lu,et al.Design and prototyping of a vibration-filling production line for soft-pot seedling of citrus[J].Journal of Huazhong Agricultural University,2026,45(02):250-258. DOI: 10.13300/j.cnki.hnlkxb.2026.02.026.
为解决我国柑橘育苗软钵基质装填作业耗时费力的问题,提出一种柑橘育苗软钵的振动装填方案,并设计一种单次可装填36钵塑料软钵或4钵无纺布大钵的柑橘育苗软钵振动装填生产线。采用理论分析和仿真计算方法对基质的混合与输送单元、装填单元、托盘输送单元的主要零部件进行结构设计和参数确定,试制样机并通过装填作业试验测试样机性能与工作效率。结果显示:该生产线运行稳定,作业效果优良。塑料软钵和无纺布大钵装填垮塌与漏装数量均为0,工作效率分别为 4 320、480 钵/h,装填均匀性较好。
A vibration-filling scheme for soft-pot seedling of citrus was proposed and a vibration-filling production line capable of filling 36 plastic soft pots or four non-woven fabric large pots at a time was designed to address the issue of time-consuming and labor-intensive substrate filling operations for soft-pot seedling of citrus in China. Theoretical analysis and simulation calculation methods were used to design the structure and determine parameters of the key components of the substrate mixing and conveying unit, the filling unit and the tray conveying unit. The prototype was successfully developed and manufactured, and its performance and working efficiency were tested through filling operation experiments. The results showed that the production line run stably with excellent operational performance. There were no collapses or missing fills for both plastic soft pots and non-woven fabric large pots. The working efficiency of plastic soft pots and non-woven fabric large pots was 4 320 and 480 pots per hour, respectively, with high efficiency and good filling uniformity. It will provide a reference for the development and optimization of filling and transfer equipment for soft-pot seedling of citrus.
韩鹤友,程帅华,宋智勇,等.柑橘黄龙病药物防治策略[J].华中 农业大学学报,2021,40(1):49-57. HAN H Y,CHENG S H,SONG Z Y,et al.Strategies on drug prevention and control of citrus Huanglongbing[J].Journal of Huazhong Agricultural University,2021,40(1):49-57 (in Chinese with English abstract) .
THAKURIA D,CHALIHA C,DUTTA P,et al.Citrus Huanglongbing(HLB):diagnostic and management options[J/OL].Physiological and molecular plant pathology,2023,125:102016[2025-10-16].https://doi.org/10.1016/j.pmpp.2023.102016.
DONG Z H,SRIVASTAVA A K,LIU X D,et al.Interactions between nutrient and Huanglongbing pathogen in citrus:an overview and implications[J/OL].Scientia horticulturae,2021,290:110511[2025-10-16].https://doi.org/10.1016/j.scienta.2021.110511.
卢志红.柑橘良种无病毒容器苗木繁育技术[J].果农之友,2017(1):23-24.LU Z H.Breeding techniques of virus-free container seedlings of citrus varieties[J].Fruit growers’ friend,2017(1):23-24 (in Chinese) .
GALLEGOS-CEDILLO V M,NÁJERA C,GRUDA N S,et al.An in-depth analysis of sustainable practices in vegetable seedlings nurseries:a review[J/OL].Scientia horticulturae,2024,334:113342[2025-10-16].https://doi.org/10.1016/j.scienta.2024.113342.
徐勤超,李善军,张衍林,等.柑橘育苗钵装填转运机设计与试验[J].农业工程学报,2020,36(18):66-72.XU Q C,LI S J,ZHANG Y L,et al.Design and test of seedling pot filling and transporting machine for citrus[J].Transactions of the CSAE,2020,36(18):66-72 (in Chinese with English abstract) .
王涛,费焱,楼婷婷,等.色块苗软薄容器基质机械化装填关键技术探讨[J].农业开发与装备,2023(11):32-35.WANG T,FEI Y,LOU T T,et al.Key technologies for mechanized filling of soft thin-walled containers with substrate for color-block seedlings[J].Agricultural development & equipments,2023(11):32-35 (in Chinese with English abstract) .
李旭,伍硕祥,匡敏球,等.蔬菜泡沫育苗盘多适应性自动叠盘装置设计与试验[J].农业机械学报,2024,55(3):122-132. LI X,WU S X,KUANG M Q,et al.Design and test of automatic tray stacking device for vegetable foam seedling trays[J].Transactions of the CSAM,2024,55(3):122-132 (in Chinese with English abstract) .
孙泽强,杜小强,李月婵,等.水稻钵苗育苗穴盘分离套盘机设计与试验[J].农业机械学报,2020,51(S1):85-92. SUN Z Q,DU X Q,LI Y C,et al.Design and experiment of tray separating and embedding machine for rice pot seedlings[J].Transactions of the CSAM,2020,51(S1):85-92 (in Chinese with English abstract) .
李心志,廖庆喜,袁华,等.油菜基质块移栽机苗床带整备装置设计与试验[J].华中农业大学学报,2024,43(2):215-226.LI X Z,LIAO Q X,YUAN H,et al.Design and test of seedbed belt preparation device for rapeseed substrate block transplanter[J].Journal of Huazhong Agricultural University,2024,43(2):215-226 (in Chinese with English abstract) .
XU Q C,CHEN H Y,LIU C X,et al.Design of the filling device for Citrus seedling pot based on turnover box[J].International journal of agricultural and biological engineering,2025,18(3):97-104.
何林,蒋杰,李家操,等.柑橘育苗钵装填成穴生产线的设计与试验[J].西南大学学报(自然科学版),2023,45(5):108-121.HE L,JIANG J,LI J C,et al.Design and test of seedling pot filling and hole punching processing line for citrus[J].Journal of Southwest University(natural science),2023,45(5):108-121 (in Chinese with English abstract) .
刘继展,彭海军,李男,等.高架栽培配套基质自动移动摊铺机设计与试验[J].农业机械学报,2018,49(1):58-67.LIU J Z,PENG H J,LI N,et al.Design and experiment of automatic mobile substrate paver for elevated cultivation[J].Transactions of the CSAM,2018,49(1):58-67 (in Chinese with English abstract) .
张珺航.马铃薯组培苗移栽机的优化与试验[D].武汉:华中农业大学,2023.ZHANG J H.Optimization and experiment of transplanting machine for potato tissue culture seedling[D].Wuhan:Huazhong Agricultural University,2023 (in Chinese with English abstract) .
曹国巍.预制混凝土构件振动台振动系统的研究[D].西安:西安建筑科技大学,2021. CAO G W. Research on vibration system of precast concrete component shaking table[D]. Xi'an:Xi'an University of Architecture & Technology,2021 (in Chinese with English abstract) .
侯和平,刘善慧,习大润,等.印刷机导向辊复合隔振装置设计与分析[J].机械设计,2025,42(9):104-111.HOU H P,LIU S H,XI D R,et al.Design and analysis of composite vibration isolator for printing machine’s guide roller[J].Journal of machine design,2025,42(9):104-111 (in Chinese with English abstract) .
章毅.铜粉烧结式热管自动填粉机设计及性能研究[ D].广州:华南理工大学,2019.ZHANG Y.Design and performance study of copper powder sintered heat-pipe automatic filling machine[D].Guangzhou:South China University of Technology,2019 (in Chinese with English abstract) .
李国明,王小瑜,李涛,等.多源激励下自走式残膜回收机机架模态分析和结构优化[J].农机化研究,2026,48(3):103-111.LI G M,WANG X Y,LI T,et al.Modal analysis and structural optimization of self-propelled residual film recovery machine under multi-source excitation[J].Journal of agricultural mechanization research,2026,48(3):103-111 (in Chinese with English abstract) .
王光恒,林慧,王玉刚,等.采棉机机架模态分析与优化[J].中国农机化学报,2024,45(6):63-71.WANG G H,LIN H,WANG Y G,et al.Modal analysis and optimization of cotton picker frame[J].Journal of Chinese agricultural mechanization,2024,45(6):63-71 (in Chinese with English abstract) .
郭俊先,刘颖灿,魏远俊,等.秸秆还田残膜回收一体机振动特性分析与结构优化[J].农业工程学报,2024,40(2):155-163.GUO J X,LIU Y C,WEI Y J,et al.Vibration characteristics analysis of the optimal structure of integrated straw returning and residual film recycling machine[J].Transactions of the CSAM,2024,40(2):155-163 (in Chinese with English abstract) .
KORMANEK M,MAŁEK S,BANACH J,et al.The influence of vibration and moisture content on the compactness of the substrate in nursery container cells determined with a multipenetrometer[J/OL].Forests,2023,14(9):1750[2025-10-16].https://doi.org/10.3390/f14091750 .
0
浏览量
2
下载量
0
CSCD
关联资源
相关文章
相关作者
相关机构
京公网安备11010802024621