Development of ± 550 kV DC GIS Basin Insulator

Shaohua Cao; Chengwei Jing; Siqiong Zhang; Zuodong Liang; Zehao Zhang; Fangwei Liang; Yong Yang; Geng Chen; Jinliang He; Chuanyang Li

doi:10.1049/hve2.70164

您当前的位置：

首页 >

文章列表页 >

Development of ± 550 kV DC GIS Basin Insulator

更新时间：2026-10-26

- Development of ± 550 kV DC GIS Basin Insulator
- High Voltage Vol. 11, Issue 4, (2026)
- 作者机构：
  
  1. Shandong Taikai High Voltage Switchgear Co. Ltd., Taian,China
  2. Tsinghua University,Beijing,China
  3. North China Electric Power University,Beijing,China
- 作者简介：
- 基金信息：
- DOI：10.1049/hve2.70164
  CLC：
- Published：2026
- 稿件说明：
移动端阅览
Shaohua Cao, Chengwei Jing, Siqiong Zhang, et al. Development of ± 550 kV DC GIS Basin Insulator[J]. High Voltage, 2026, 11(4).
DOI：

Shaohua Cao, Chengwei Jing, Siqiong Zhang, et al. Development of ± 550 kV DC GIS Basin Insulator[J]. High Voltage, 2026, 11(4). DOI： 10.1049/hve2.70164.

摘要

The basin insulator is a core component of the insulation system for ± 550 kV gas-insulated switchgear (GIS). This paper

using a finite element method for multi-physics simulations of electric–thermal coupling

determines a geometry suitable for the industrial production of ± 550 kV GIS basin insulators. Results show that

as the temperature increases

the source of charge accumulation on the convex surface of the insulator shifts from conduction current on the gas side to conduction current within the insulator. Surface potential under temperature gradients presents an absolute surface potential value below 5 kV. Mechanical performance tests

as well as electrical tests—including polarity reversal

DC superimposed impulse tests and a three-month long-term DC duration test at 1.5 times the rated voltage—were conducted. The developed ± 550 kV GIS basin insulator passed all the tests.

Abstract

The basin insulator is a core component of the insulation system for ± 550 kV gas-insulated switchgear (GIS). This paper

using a finite element method for multi-physics simulations of electric–thermal coupling

determines a geometry suitable for the industrial production of ± 550 kV GIS basin insulators. Results show that

as the temperature increases

as well as electrical tests—including polarity reversal

DC superimposed impulse tests and a three-month long-term DC duration test at 1.5 times the rated voltage—were conducted. The developed ± 550 kV GIS basin insulator passed all the tests.

关键词

Keywords

references

Views

下载量

CSCD

Alert me when the article has been cited

提交

Tools

Publicity Resources

Investigation of the Simplified Equivalent Circuit Model of the Post-Arc Sheath Stage in DC Vacuum Circuit Breakers

Experimental Study on Disintegration Characteristics of Water Droplets in Icicle-Flat Plate Gap Beyond Critical Discharge Voltage

Dynamic Modal-Based Vibration Characteristics Analysis and Looseness Fault Diagnosis in Transformer Winding

Dynamic Behaviour of Bubbles in Oil Under Electrothermal Ageing

Cone-Type Insulator Surface Electric Field Measurement Based on Advanced Integrated Optical Electric Field Sensor

Related Author

No data

Related Institution

No data

AI问答

⁰